This is true, particularly Epson printers. Hewlett-Packard printer cartridge including some heads of the so-called replacement cartridge also replaces the first. Does this make HP “superior” Epson? Yes and no. You can find three U.S. dollars of Epson compatible cartridges.
I do not think you can find the HP-compatible cartridges more than 10 yuan more. If you pay $ 5 – $ 7 per cartridge, it will not be long before you can buy a new printer in the differences. So, yes, the system of HP ink cartridges on its head on the head can provide more insurance to plug, but you can pay too much for it.
1) Do not allow any color of the end of company is a lubricant for the drive head. Some ink colors, even if you only print in black and vice versa. If you lack the color, print, you can destroy the print head and ink instead of the friction and lubrication to run it. Therefore, most printers can not print color, the lack of even if you do not use it. If you allow the color up, the remaining ink in the first block, a permanent blockade. You will never be able again to print color. Therefore, when they always replace the print cartridge is empty. Do not use deceptive practices such specialized chips reset, there is a cartridge that is empty, the printer.
2) never left the from the printer requires very little power. Every so often, the printer sends a signal cycle of the head, ink, it will not block. If you turn off your printer, do the next time you open the number of clean waste ink. As some companies give you only 3-7 ml of ink, first of all, you will not waste 2-3 ml cleaning. Extra printer ink is immersed in the waste pad. When the waste pad is full, the printer stops working. It is more expensive than a new printer to fix it. Off between the use of inkjet printers, in fact, would certainly shorten the life run out of ink faster. If we exclude Tip # 2, at least aware of the following
3) never closed and 1 When you turn off the printer, ink jet
4) Do not close the printer a long time “If it takes longer you leave the printer, will plug in your head and ink to throw off the printer. I know someone with a Canon (which can occur in all inkjet printers) must have the first two in the first few months ago, Canon to replace tech told her to stop to close it. Since then, it has the perfect job more than a year. warnings do not meet the Resetter Epson printer ink run
I do not know if this applies to other brands of printers, but I know that Resetter Epson T11. If you let the printer ink, air will enter the jet and residual ink remaining will be blood clots. small tube in the air can break the power vacuum, the need to continue to retreat to the head. This can permanently prevent over again, the print head. In order to prevent this from happening, love Epson printer cartridges ink of the report is not possible when there are still some left – to force you to change color before, it runs this. However, the printer how much ink do not know how much in the end. It had appreciated. This means that things could error, and may print an empty box for you. how to get it?
1) you want to print the image or page, we need a lot of print use. printer ink remaining, based on printed page and the page number of the estimated average coverage.
2) To remove and replace the cartridge. The printer can be fooled and think that there is a new cartridge and reset the counter endless . ink the printer will be faster than expected.